Distributes a high definition audio/video source to multiple locations over Cat5 cable
Audio/video baluns provide an economical alternative to coaxial cables for long length audio/video installations. Baluns are able to maintain a critical 75 Ohm Impedance to audio/video devices while providing 100 Ohm Impedance to the cabling infrastructure. This balanced impedance allows the audio/video signals to travel with little to no degradation up to 300ft over more affordable unshielded twisted pair Cat5 cabling (Up to 500ft over Cat6).
This audio/video hub is able to distribute Component Video, Digital Audio, Left/Right Audio and IR Emitter transmission over two common Cat5 cables. It features RCA jacks for audio, Component Video, and S/PDIF connections and 3.5mm jacks for IR Emitter connections. Dual output ports enable the audio/video signals to be delivered to two separate displays. Loop-thru jacks support additional hubs for larger installations. At least one receiver unit (sold separately - #41168) is required on the display end to complete the installation.
Features:- Active Amplification ensures high quality transmission
- Discrete Passive IR Channel for the use of external IR remote control systems
- Loop output for use of additional CAT5 transmitters
- Two Cat5 outputs for additional location
Specifications:- Video:
- Input Impedance: 75 ohms
- Output Impedance: 75 ohms
- Video Bandwidth: 50MHz
- Distance: 300ft @1080i (500 feet with Cat6 cable)
- Audio (Analog):
- Input Impedance: 22kohm
- Output Impedance: 1kohm
- Frequency Response: 20Hz~20 kHz
- Signal to Noise: 80dB @ 1volts out
- Audio (Digital)
- Supports standard S/PDIF digital audio
Sign In
